Chrysler 2005 Crossfire SRT6 Service Manual page 3828

23 - 280 DOOR
4. Remove the plastic seal located over the check
strap bolt (6).
CAUTION: Avoid damaging the vehicle's paint.
5. Remove the torx screw (4) and then remove the
retaining plate (3).
6. Remove the bolts (1) attaching the check strap to
the door.
7. Remove the seal from the door check strap.
8. Remove the door check strap through the installa-
tion opening in the inner door panel.
INSTALLATION
Note: Lubricate the door check strap below the
plastic cover.
1. Install the door check strap through the installation
opening in the inner door panel.
2. Install the screw (3), then install the seal (5) to the
door check strap.
Note: Tighten the bolts on the end first.
3. Install the two bolts (1) attaching the door check
strap (2) to the door. Tighten to 10 N·m (88 in.
lbs.).
4. Install the torx screw (4) and install the retaining
plate.
ZH