Chrysler 2005 Crossfire SRT6 Service Manual page 4267

24 - 138 PLUMBING ZH
INSTALLATION
1. Install the coolant circulation pump (3) into the vehicle.
2. Install the two bolts (1) attaching the coolant circulation pump (3) to the vehicle.
3. Install the coolant circulation pump harness connector to the coolant circulation pump (3).
4. Install the two hoses (2) the coolant circulation pump (3).
5. Install the headlamp assembly to the vehicle. (Refer to 8 - ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEAD-
LAMP UNIT - INSTALLATION).
6. Fill the coolant system. (Refer to 7 - COOLING/ENGINE/COOLANT - STANDARD PROCEDURE).