Chrysler 2005 Crossfire SRT6 Service Manual page 3609

ZH
9620 MAIN CYLINDER TRAVEL SENSOR (BASE SIDE) +/- CIRCUIT OPEN/SHORT
TO GROUND (CONTINUED)
• When Monitored: Continuous, with the ignition on.
• Set Condition: When the Power Top Control Module senses an open or a short to ground on the Travel
Sensor (Base Side) +/- circuit.
OPEN TRAVEL SENSOR (+) CIRCUIT
OPEN TRAVEL SENSOR (-) CIRCUIT
TRAVEL SENSOR (+) CIRCUIT SHORTED TO GROUND
TRAVEL SENSOR (-) CIRCUIT SHORTED TO GROUND
TRAVEL SENSOR
POWER TOP CONTROL MODULE
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.
Diagnostic Test
1.
Monitor the Main Cylinder Travel Sensor (Base Side)
Turn the ignition on.
The Convertible Top must be up and locked.
With the DRB III , select Sensor Display and monitor the MN CYL
TRVL SEN BSE.
Does the DRB III
70–85 Counts?
Yes >> Go To 8
No >> Go To 2
display MN CYL TRVL SEN BSE between
Possible Causes
CONVERTIBLE TOP 23 - 61