Chrysler 2005 Crossfire SRT6 Service Manual page 3989

23 - 428 SEATS
INSTALLATION
1. Install the seats into the vehicle.
2. Connect the electrical connectors for the seat
heater and the electrical seat adjustment.
3. Insert the bolts (1) in the bolt holes in the rear of
the seat track.
4. Tighten the two rear seat track bolts (1). Tighten to
50 N·m (37 ft. lbs.).
5. Install the belt end fitting to the seat adjuster.
Note: Tighten the bolt for the belt end fitting only
so that it can be moved.
6. Install the bolt (2) at the belt end fitting. Tighten to
35 N·m (26 ft. lbs.).
7. Move the seat all the way backwards.
8. Install the two front seat track bolts (2). Tighten to
50 N·m (37 ft. lbs.).
9. Install the plastic covering (3) to the seat tracks.
ZH