23 - 318J
EXTERIOR
INSTALLATION - SRT-COUPE
NOTE: Be sure not to damage any paint while
guiding the spoiler wing studs (2) through the
holes in the liftgate (4).
1. Guide the spoiler wing studs (2) through the holes
installing the spoiler wing (1) onto the liftgate (4)
2. Install the four nuts (3). Tighten to 8 N·m (71 in.
lbs.).
3. Install the lower liftgate trim panel. (Refer to 23 -
BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/
TRIM PANEL - INSTALLATION).
2005 ZH Service Manual
Publication No. 81-270-05036
ZH
05ZH23-318J October, 2004