Chrysler 2005 Crossfire SRT6 Service Manual page 4248

ZH
6. Connect the heater core temperature sensor (1).
7. Install the center I/P support bar to bulkhead bolts
and nuts (2).
8. Connect the recirculated air switchover valve con-
nector (3).
9. Install the vacuum reservoir then connect the vac-
uum reservoir solenoid connector and vacuum
hose (2).
10. Connect the passenger side air bag harness con-
nector (1).
11. Install the glove box assembly.(Refer to 23 -
BODY/INSTRUMENT
PANEL ASSEMBLY - INSTALLATION).
12. Install the SKREEM
bracket. Then connect the SKREEM harness con-
nectors.(Refer to 8 - ELECTRICAL/VEHICLE
THEFT SECURITY/SENTRY
ENTRY MODULE - INSTALLATION).
13. Install the instrument cluster and bracket assem-
bly. (Refer to 23 - BODY/INSTRUMENT PANEL/
INSTRUMENT
INSTALLATION).
14. Install the I/P top cover. (Refer to 23 - BODY/IN-
STRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - INSTALLATION).
15. Install the front and rear center consoles.(Refer to 23 - BODY/INTERIOR/CENTER CONSOLE - INSTALLA-
TION) and (Refer to 23 - BODY/INTERIOR/CENTER CONSOLE - INSTALLATION).
PANEL/INSTRUMENT
module and mounting
KEY REMOTE
PANEL ASSEMBLY -
DISTRIBUTION 24 - 119