Chrysler 2005 Crossfire SRT6 Service Manual page 3686

23 - 138 CONVERTIBLE TOP
9841 HYDRAULIC SOLENOID S4 SUPPLY VOLTAGE CIRCUIT OPEN/SHORT TO B(+) (CONTINUED)
6.
PTCM
Turn the ignition off.
Measure the resistance between ground and the Hydraulic Solenoid
S3/S4 Ground circuit by backprobing the Power Top Control Module
C2 harness connector.
Is the resistance below 5.0 ohms?
Yes >> Repair the Hydraulic Solenoid S3/S4 Ground circuit for an
open.
Perform POWER TOP CONTROL MODULE VERIFICA-
TION TEST.
No >> Replace the Power Top Control Module.(Refer to 8 -
ELECTRICAL/ELECTRONIC
POWER TOP CONTROL MODULE - REMOVAL).
Perform POWER TOP CONTROL MODULE VERIFICA-
TION TEST.
CONTROL MODULES/
ZH