Chrysler 2005 Crossfire SRT6 Service Manual page 4246

ZH
23. Install the instrument cluster cover (1). (Refer to 8
- ELECTRICAL/INSTRUMENT
INSTALLATION).
24. Install the two hot water hoses (1) then install the
two hot water hose clamps to hot water hoses
located on the right side of the bulkhead.
25. Install the hot water hose (1) the install the hot
water hose clamp located inboard to the brake
booster on the bulkhead.
26. Fill the coolant to the engine cooling system.(Re-
fer to 7 - COOLING/ENGINE/COOLANT - STAN-
DARD PROCEDURE).
27. Connect the negative battery cable.
CLUSTER -
DISTRIBUTION 24 - 117