Chrysler 2005 Crossfire SRT6 Service Manual page 3848

23 - 300 DOOR
5. Remove the door end cover (1) and the door latch
cover (2) from the door.
6. Remove the SRS cover (3) and remove the screw
behind the cover.
7. Remove the door trim panel retaining screws (2).
8. Using a trim stick, disengage the retaining clips on the bottom and both sides of the door panel (1).
9. Lift the top of the door trim panel upwards and out of the clips at the sealing rail using a trim stick while pulling
the trim panel away from the door.
10. Disconnect the front door speaker electrical connector.
11. Disconnect the door lock cable from the plastic retainer clip located on the back side of the inside of the trim
panel.
12. Check the sheet-metal clip nuts on the door trim panel. If necessary replace any damaged sheet-metal clip
nuts.
13. Check the door foil on the door and the clips on the door lining. If necessary replace any damaged door foil or
clips.
2005 ZH Service Manual Publication No. 81-270-05036
ZH
05ZH23-300 October, 2004