Chrysler 2005 Crossfire SRT6 Service Manual page 4161

24 - 32 HEATING & AIR CONDITIONING - ELECTRICAL DIAGNOSTICS
ENGINE COOLANT TEMPERATURE SENSOR CIRCUIT (CONTINUED)
10.
MEASURE THE RESISTANCE FROM THE ENGINE COOLANT TEMPERATURE SENSOR SIGNAL
CIRCUIT TO THE SENSOR GROUND CIRCUIT
With the ignition off.
Measure the resistance from the Engine Coolant Temperature Sensor
Signal circuit to the Sensor Ground circuit at the Engine Coolant Tem-
perature Sensor harness connector.
Is the resistance below 1000.0 ohms?
Yes >> Repair the Engine Coolant Temperature Sensor Signal cir-
cuit for a short to the Sensor Ground circuit.
Perform BODY VERIFICATION TEST.
No >> Replace the Powertrain Control Module. (Refer to 8 -
ELECTRICAL/ELECTRONIC CONTROL MODULES/POW-
ERTRAIN CONTROL MODULE - REMOVAL).
Perform BODY VERIFICATION TEST.
ZH