Chrysler 2005 Crossfire SRT6 Service Manual page 3577

ZH
REAR SPOILER VERIFICATION TEST
REAR SPOILER VERIFICATION TEST
1.
Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
Operate the Spoiler Switch to fully extend the spoiler.
Operate the Spoiler Switch to fully retract the spoiler.
Drive the vehicle at 89 km/h (55 MPH) and verify the spoiler operation.
With the DRB III , confirm that no DTCs are present and that all components are functioning properly.
If a DTC is present, refer to the appropriate category and select the corresponding symptom.
Are any DTCs present?
YES >> Repair is not complete, refer to appropriate symptom.
NO >> Repair is complete.
BODY - ELECTRICAL DIAGNOSTICS 23 - 29