Chrysler 2005 Crossfire SRT6 Service Manual page 4069

23 - 508 CONVERTIBLE TOP
ZH
OPERATION
There are 14 Hydraulic Lines that are attached to the Power Top Hydraulic Assembly (4). The lines connect to a
variety of cylinders and latches on the Convertible Top. The Main Bow Cylinders (2), Rear Bow Cylinders (1), Ton-
neau Cover Cylinder (5), Tonneau Cover Latch (6), and the Rear Bow Latch (3). Each hydraulic cylinder has two
hydraulic lines, one at the base side to raise the cylinder and one at the rod side to lower the cylinder.
REMOVAL
Note: The hydraulic lines to the hydraulic cylin-
ders must be replaced in pairs.