Chrysler 2005 Crossfire SRT6 Service Manual page 4217

24 - 88 CONTROLS
INSTALLATION
1. Connect the evaporator temperature sensor har-
ness to the evaporator temperature sensor (1).
2. Push the evaporator temperature sensor (1) into
the A/C heater case.
3. Install the center console. (Refer to 23 - BODY/IN-
TERIOR/CENTER CONSOLE - INSTALLATION).
HEATER CORE TEMPERATURE SENSOR
REMOVAL
1. Remove the center console. (Refer to 23 - BODY/
INTERIOR/CENTER CONSOLE - REMOVAL).
2. Remove the heater core temperature sensor (1)
located on the front of the heater A/C case (2).
3. Disconnect the heater core temperature sensor
harness connector from the sensor.
ZH