Chrysler 2005 Crossfire SRT6 Service Manual page 4179

24 - 50 HEATING & AIR CONDITIONING - ELECTRICAL DIAGNOSTICS
A/C COMPRESSOR CLUTCH CIRCUIT (CONTINUED)
When Monitored and Set Condition
• When Monitored: Engine Running with the A/C on.
• Set Condition: The A/C Heater Control Module detects an A/C Compressor malfunction.
A/C COMPRESSOR CLUTCH SIGNAL CIRCUIT OPEN
A/C COMPRESSOR CLUTCH
A/C HEATER CONTROL MODULE
For a complete HVAC Circuit Diagram (Refer to 24 - HEATING & AIR CONDITIONING - SCHEMATICS AND DIA-
GRAMS).
Diagnostic Test
1.
TEST THE A/C COMPRESSOR CLUTCH
Turn the ignition off.
Disconnect the inline connector C106 in the underhood relay control
module compartment.
Note: Check connector - Clean/repair as necessary.
Using a jumper wire to battery power, energize the A/C Compressor
clutch.
Does the A/C Compressor clutch energize?
Yes >> Go to 2
No >> Go to 3
POSSIBLE CAUSES
ZH