Chrysler 2005 Crossfire SRT6 Service Manual page 4063

23 - 502 CONVERTIBLE TOP
INSTALLATION - REAR BOW CYLINDER
1. Install the rear bow cylinder (2) into the top frame
and install the retainers (1 and 3) (right side
shown, left side similar).
2. Connect the travel sensors to the cylinder (4) (left
side only).
3. Connect the hydraulic lines to the cylinder using
new O-rings and retainers.
4. Install the cover side retainers to the top frame by
sliding the retainer into the frame and pushing up
to lock into place (left side shown, right side simi-
lar).
5. Install new retaining rivet (1) (left side shown, right
side similar).
ZH