Chrysler 2005 Crossfire SRT6 Service Manual page 3923

23 - 362 INSTRUMENT PANEL
REMOVAL - INSTRUMENT CLUSTER COVER - RHD
1. Disconnect the negative battery cable.
2. Remove the right side lower instrument panel. (Refer to 23 - BODY/INSTRUMENT PANEL/INSTRUMENT
PANEL ASSEMBLY - REMOVAL).
3. Remove the SKREEM antenna ring from the key cylinder.
4. Remove the screws attaching the instrument cluster cover to the I/P.
5. Disconnect the instrument cluster cover from the I/P top with a plastic wedge.
6. Tip the instrument cluster cover toward the rear at the bottom. Lift the instrument cluster cover over the steering
column and simultaneously pull down releasing the cover from the I/P.
ZH