Chrysler 2005 Crossfire SRT6 Service Manual page 4209

24 - 80 CONTROLS
INSTALLATION
1. Install the electronic blower motor regulator assem-
bly (4) to the heater case.
2. Install the screws (1) attaching the blower motor
regulator to the blower motor assembly.
Note: The electrical leads are a one-way connec-
tion to the blower motor.
3. Connect the electrical leads blue (2) and red (3).
4. Swing the blower motor door up.
5. Slide the motor door catch mounts (1) to the inside.
ZH