Chrysler 2005 Crossfire SRT6 Service Manual page 4043

23 - 482 CONVERTIBLE TOP
When the PTCM senses that the rear bow has been lowered and locked by the rear bow travel sensor and the rear
bow switch, all hydraulic pressure is released.
STANDARD PROCEDURE
STANDARD PROCEDURE - RELIEVING HYDRAULIC PRESSURE
Note: The hydraulic pressure must be relieved before the top can manually be raised or lowered.
1. Turn the ignition to the "ON" position.
2. Push down on the convertible top switch and hold in that position.
3. Turn the ignition "OFF" and continue to push down on the switch 5 seconds.
4. After 5 seconds the hydraulic system pressure will be relieved.
STANDARD PROCEDURE - MANUALLY LOWER TOP
Note: The pressure from the top hydraulic system
must be relieved before attempting to manually
lower top (Refer to 23 - BODY/CONVERTIBLE TOP
- STANDARD PROCEDURE).
Note: Make sure the rear cargo compartment
divider is secured in its vertical position.
1. Lower the windows and open the doors.
2. Unlock the top from the windshield header by
pushing the release handle button, pulling the han-
dle down and turning it clockwise just past a quar-
ter turn.
ZH