Chrysler 2005 Crossfire SRT6 Service Manual page 3830

23 - 282 DOOR
CAUTION: To avoid paint damage, have an assis-
tant help while removing the door.
3. Disconnect the side view mirror (1) and the power
window motor connector (5).
4. Remove the bolts from the bottom and top hinge
and then slowly pull door away from A-pillar.
5. Remove the protective hose (3) from the front door
and pull out all electrical leads as well as the lock
air line.
6. Remove the front door and lay down on secure
clean area.
INSTALLATION
CAUTION: To avoid paint damage, have an assis-
tant help while installing the door.
1. Install the protective hose on the front door and
thread all electrical leads as well as the air line
lead into the door.
2. Slowly position the door onto the A-pillar then
install the bolts to the bottom and top hinge.
Tighten to 32 N·m (24 ft. lbs.).
3. Connect the rearview mirror (1) and the power win-
dow motor (4) electrical connector.
4. Install the door check strap to the A-pillar. (Refer to 23 - BODY/DOOR - FRONT/CHECK STRAP -
INSTALLATION).
ZH