Chrysler 2005 Crossfire SRT6 Service Manual page 4070

ZH
1. Slide the hydraulic line retaining clip (2) out of the groove in the hydraulic cylinder.
2. Remove the hydraulic line (1) from the hydraulic
cylinder (3).
Note: If necessary, use a small pick to remove
the O-ring from the hydraulic cylinder.
3. Remove the O-ring from the hydraulic cylinder
(3).
4. Remove the bolts (1) from the hydraulic line retain-
ing plate (2).
5. Carefully separate the hydraulic lines from the
power top hydraulic assembly (3).
CONVERTIBLE TOP 23 - 509