Chrysler 2005 Crossfire SRT6 Service Manual page 4241

24 - 112 DISTRIBUTION
20. Remove the I/P support bolts (4) to the A-pillar on
the right and left sides of the I/P support.
21. Remove the I/P support.
22. Disconnect the HVAC unit drain tubes.
23. Remove the HVAC unit from vehicle.
INSTALLATION
INSTALLATION
1. Install the HVAC housing to the vehicle.
2. Install any wiring harnesses associated with the
HVAC housing with nylon ties in their respected
routing positions.
3. Connect the harness connector (1) to the fresh air/
recirculating air flap switchover valve located on
the right side of the heater housing.
ZH