Chrysler 2005 Crossfire SRT6 Service Manual page 4244

ZH
13. Locate the steering column to its mounting posi-
tion on the instrument panel support.
14. Install the bolts and nuts (1) attaching the steering
column to the instrument panel support.
15. Install the connection (1) for electric leads on
body tunnel.
16. Install all of the wiring harnesses to their
respected routing positions attaching them with
nylon ties on the instrument panel support.
17. Install the Sentry Key Remote Entry Module
(SKREM) by:
• Connecting the 2-pin CAN harness connector to
the SKREM module.
• Connecting the 2-pin harness connector for the
transponder coil.
• Connecting the 18-pin connector.
• Installing the SKREM control module to the base
plate.
18. Install instrument cluster holder to the vehicle then
install the nuts for the instrument cluster holder.
19. Install the green insulating mats.
DISTRIBUTION 24 - 115