Chrysler 2005 Crossfire SRT6 Service Manual page 3607

ZH
9612 MAIN CYLINDER TRAVEL SENSOR (ROD SIDE) (+) CIRCUIT TO B(+) (CONTINUED)
3.
INTERMITTENT WIRING AND CONNECTORS
The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible
intermittent condition.
Note: Check connectors — Clean/repair as necessary. Poor pin to terminal connections can set DTCs.
Note: Check for any Technical Service Bulletins that may apply.
Using the wiring diagram/schematic as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the
wires while checking for shorts and open circuits.
Were there any problems found?
Yes >> Repair as necessary.
Perform POWER TOP CONTROL MODULE VERIFICATION TEST.
No >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for
a possible intermittent condition.
CONVERTIBLE TOP 23 - 59