Chrysler 2005 Crossfire SRT6 Service Manual page 4235

24 - 106 DISTRIBUTION
24. Disconnect the connectors (1) from the vacuum
reservoir.
CAUTION: To avoid any damage to the vehicle a
helper may be required to aid in the removal of the
instrument panel support.
25. Remove the instrument panel support.
26. Remove the electrical harness connector on
heater core temperature sensor located on the
front of the heater housing and the evaporator
temperature sensor (1) located on the left side of
the heater case.
27. Disconnect the electrical harness connector from
the fresh air/recirculating air flap switchover valve
(1) located on the right front of the heater housing
where the vacuum lines for the reservoir where
removed.
28. Remove all the nylon ties on the heater housing
attaching any wiring harnesses.
CAUTION: To avoid any damage to the vehicle a
helper may be required to aid in the removal of the
instrument panel support.
CAUTION: Be sure not to spill any residual coolant
from the heater housing into the passenger com-
partment of the vehicle.
29. Remove the heater housing from the vehicle by
tipping it forward and removing through the pas-
senger side door.
ZH