Table of Contents
Advertisement
ZH
2. Using a suitable propping device, prop the rear lift-
gate up and install the gas prop (2) to its mount
point. The install the upper lock cap (1) on the gas
prop.
3. Connect the following harness connections:
• Right and left defroster harness connections.
• Right and left license plate lamp harness con-
nections.
• Ground lug G302.
• Antenna amplifier harness connector.
• Rear liftgate lock switch.
• Pneumatic lock air line.
• Center High Mounted Stop Lamp (CHMSL) har-
ness connector.
• Rear spoiler limit switch and motor harness
connectors.
4. Install the rubber grommet (1) to the liftgate.
DECKLID/LIFTGATE 23 - 233
Advertisement
Chapters
Table of Contents
