Table of Contents
Advertisement
24 - 140
PLUMBING
1. Disconnect the negative battery cable.
2. Evacuate the refrigerant from the A/C system.
(Refer to 24 - HEATING & AIR CONDITIONING/
PLUMBING - STANDARD PROCEDURE).
WARNING: OPEN THE COOLING SYSTEM ONLY
WHEN THE COOLANT TEMPERATURE IS BELOW
90°C. OPEN THE CAP SLOWLY AND REDUCE THE
PRESSURE. WEAR PROTECTIVE GLOVES, PROTEC-
TIVE CLOTHING AND PROTECTIVE GOGGLES.
3. Relieve pressure in cooling system by turning the
radiator cap on the reservoir to catch "1".
4. Remove the radiator fan. (Refer to 7 - COOLING/
ENGINE/RADIATOR FAN - REMOVAL).
5. Remove the coolant reservoir (1). (Refer to 7 -
COOLING/ENGINE/COOLANT
PRESS CONTAINER - REMOVAL).
6. Remove
the
refrigerant
condenser.
7. Loosen the mount for the condenser connection fit-
tings (1-2).
8. Tilt the radiator forward and remove the condenser.
RECOVERY
lines
(1)
from
the
ZH
Advertisement
Chapters
Table of Contents
