Chrysler 2005 Crossfire SRT6 Service Manual page 3774

23 - 226 DECKLID/LIFTGATE
4. Connect the rear spoiler harness connectors (1).
5. Install the rear liftgate trim panel. (Refer to 23 -
BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/
TRIM PANEL - INSTALLATION).
6. Connect the negative battery cable.
GAS PROP
REMOVAL
1. Open the rear liftgate.
2. Support the liftgate with a suitable propping device.
3. Remove the gas prop lock cap (1) on the upper
end. Then pull the gas prop (2) off of its mounting
point.
ZH