Chrysler 2005 Crossfire SRT6 Service Manual page 4218

ZH
INSTALLATION
1. Connect the heater core temperature sensor har-
ness connector to the sensor.
2. Install the heater core temperature sensor (1) to
the front of the heater A/C case (2).
3. Install the center console. (Refer to 23 - BODY/IN-
TERIOR/CENTER CONSOLE - INSTALLATION).
A/C PRESSURE TRANSDUCER
REMOVAL
1. Evacuate the A/C system. (Refer to 24 - HEATING
& AIR CONDITIONING/PLUMBING - STANDARD
PROCEDURE).
2. Disconnect the A/C pressure transducer harness
connector (2).
3. Remove the A/C pressure transducer from the
receiver/dryer (1).
CONTROLS 24 - 89