Chrysler 2005 Crossfire SRT6 Service Manual page 4219

24 - 90 CONTROLS
INSTALLATION
1. Install the A/C pressure transducer to the receiver/
dryer (1).
2. Connect the A/C pressure transducer harness con-
nector (2).
3. Charge the A/C system. (Refer to 24 - HEATING &
AIR CONDITIONING/PLUMBING - STANDARD
PROCEDURE).
RECIRC AIR SWITCHOVER VALVE
REMOVAL
1. Remove the glove compartment. (Refer to 23 -
BODY/INSTRUMENT
REMOVAL).
2. Disconnect the vacuum lines (1) from the recircula-
tion switchover valve.
3. Disconnect the recirculation switchover valve har-
ness connector from the recirculation switchover
valve.
4. Remove the recirculation switchover valve.
PANEL/GLOVE BOX -
ZH