H3C s3100 series Command Manual page 1099

undo certificate request mode
View
PKI domain view
Parameters
auto: Specifies to request a certificate in auto mode.
key-length: Length of the RSA keys, in the range 512 to 2,048 bits. It is 1,024 bits by default.
password: Password for certificate revocation, a case-sensitive string of 1 to 31 characters.
cipher: Specifies to display the password in cipher text.
simple: Specifies to display the password in clear text.
manual: Specifies to request a certificate in manual mode.
Description
Use the certificate request mode command to set the certificate request mode.
Use the undo certificate request mode command to restore the default.
By default, manual mode is used.
In auto mode, an entity automatically requests a certificate from an RA or CA when it has no certificate
or when the existing certificate is about to expire. In manual mode, all operations associated with
certificate request are carried out manually.
Related commands: pki request-certificate.
Examples
# Specify to request a certificate in auto mode.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request mode auto
certificate request polling
Syntax
certificate request polling { count count | interval minutes }
undo certificate request polling { count | interval }
View
PKI domain view
Parameters
count: Maximum number of attempts to poll the status of the certificate request, in the range 1 to 100.
minutes: Polling interval, in the range 5 to 168 minutes.
Description
Use the certificate request polling command to specify the certificate request polling interval and
attempt limit.
1-4