H3C s3100 series Command Manual page 1111

View
PKI entity view
Parameters
org-unit-name: Organization unit name for distinguishing different units in an organization, a
case-insensitive string of 1 to 31 characters. No comma can be included.
Description
Use the organization-unit command to specify the name of the organization unit to which this entity
belongs.
Use the undo organization-unit command to remove the configuration.
By default, no organization unit name is specified for an entity.
Examples
# Configure the name of the organization unit to which an entity belongs as unit-name.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization-unit unit-name
pki certificate access-control-policy
Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy { policy-name | all }
View
System view
Parameters
policy-name: Name of the certificate attribute-based access control policy, a case-insensitive string of 1
to 16 characters.
all: Specifies all certificate attribute-based access control policies.
Description
Use the pki certificate access-control-policy command to create a certificate attribute-based access
control policy and enter its view.
Use the undo pki certificate access-control-policy command to remove a specified or all certificate
attribute-based access control policies.
No access control policy exists by default.
Examples
# Configure an access control policy named mypolicy and enter its view.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-cert-acp-mypolicy]
1-16