H3C s3100 series Command Manual page 1122

Related commands: display ssl server-policy.
Examples
# Set the SSL connection close mode to wait mode.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] close-mode wait
display ssl client-policy
Syntax
display ssl client-policy { policy-name | all }
View
Any view
Parameters
policy-name: SSL client policy name, a case-insensitive string of 1 to 16 characters.
all: Displays information about all SSL client policies.
Description
Use the display ssl client-policy command to view information about a specified or all SSL client
policies.
Examples
# Display information about SSL client policy policy1.
<Sysname> display ssl client-policy policy1
SSL Client Policy: policy1
SSL Version: SSL 3.0
PKI Domain: 1
Prefer Ciphersuite:
RSA_RC4_128_SHA
Table 1-1 display ssl client-policy command output description
SSL Client Policy
SSL Version
PKI Domain
Prefer Ciphersuite
display ssl server-policy
Syntax
display ssl server-policy { policy-name | all }
Field
1-3
Description
SSL client policy name
Version of the protocol used by the SSL client
policy, SSL 3.0 or TLS 1.0.
PKI domain of the SSL client policy
Preferred cipher suite of the SSL client policy