Canon imageRUNNER ADVANCE C350 series Service Manual page 11

Procedure ---------------------------------------------------------------------------------- 4-144
Removing the Multi-purpose Tray Pickup Roller
/Multi-purpose Tray Separation Roller
/Multi-purpose Tray Feed Roller --------------------------------------------- 4-148
Preparation -------------------------------------------------------------------------------- 4-148
Procedure ---------------------------------------------------------------------------------- 4-148
Reassembling when the Multi-purpose Tray Separation Roller Shaft is
detached -------------------------------------------------------------------------- 4-152
Reassembling when the Multi-purpose Tray Separation Roller Shaft is
detached and dropped inside the host machine --------------------------------- 4-154
Removing the Registration/Pickup Unit ----------------------------------- 4-157
Preparation -------------------------------------------------------------------------------- 4-157
Procedure ---------------------------------------------------------------------------------- 4-157
Procedure after replacement
When images with uneven density (white spots) are generated after replacing
the Registration Unit -------------------------------------------------------------------- 4-159
Removing the Delivery/Reverse Unit -------------------------------------- 4-165
Preparation -------------------------------------------------------------------------------- 4-165
Procedure ---------------------------------------------------------------------------------- 4-165
Removing the Cassette 1 Lifter Drive Unit ------------------------------- 4-166
Preparation -------------------------------------------------------------------------------- 4-166
Procedure ---------------------------------------------------------------------------------- 4-166
Removing the Cassette 1 Pickup Drive Unit ----------------------------- 4-169
Preparation -------------------------------------------------------------------------------- 4-169
Procedure ---------------------------------------------------------------------------------- 4-169
Cleaning Procedure ------------------------------------------------------ 4-171
Layout Drawing ------------------------------------------------------------------ 4-171
Cleaning the Copyboard Glass/Reading Glass ------------------------- 4-172
Procedure ---------------------------------------------------------------------------------- 4-172
Cleaning the Dustproof Glass ----------------------------------------------- 4-172
Procedure ---------------------------------------------------------------------------------- 4-172
Cleaning when installing/removing the ITB Unit ------------------------ 4-173
Preparation -------------------------------------------------------------------------------- 4-173
Procedure ---------------------------------------------------------------------------------- 4-173
Cleaning the Registration Patch Sensor Unit ---------------------------- 4-174
Preparation -------------------------------------------------------------------------------- 4-174
Procedure ---------------------------------------------------------------------------------- 4-174
Cleaning the Registration Front Guide ------------------------------------ 4-175
Procedure ---------------------------------------------------------------------------------- 4-175
Cleaning the Registration Roller/Pre-registration Roller -------------- 4-176
Procedure ---------------------------------------------------------------------------------- 4-176
Cleaning the Secondary Transfer Guide ---------------------------------- 4-177
Procedure ---------------------------------------------------------------------------------- 4-177
Cleaning the Fixing Inlet Guide ---------------------------------------------- 4-179
Preparation -------------------------------------------------------------------------------- 4-179
Procedure ---------------------------------------------------------------------------------- 4-179
Data to be handled by SRAM(with HDD Encryption Board ---- 4-180
The kind of data to handle ---------------------------------------------------- 4-180
Handling SRAM data of this machine ---------------------------------------------- 4-180
5
Adjustment
Document Exposure System -----------------------------------------------5-2
Service mode backup ------------------------------------------------------------- 5-2
When clearing the Reader-related RAM data of the Main Controller
PCB. ----------------------------------------------------------------------------------- 5-3
Original Exposure and Feed System (Reader) ----------------------------- 5-4
Copyboard Glass Unit --------------------------------------------------------------------- 5-4
After Replacing the Scanner Unit (Reader side CIS) ------------------------------ 5-7
ADF Unit -------------------------------------------------------------------------------------5-10
Main Controller -------------------------------------------------------------- 5-15
HDD ----------------------------------------------------------------------------------5-15
Main controller PCB --------------------------------------------------------------5-16
DC controller PCB ----------------------------------------------------------------5-16
TPM PCB ---------------------------------------------------------------------------5-16
FLASH PCB ------------------------------------------------------------------------5-16
Control Panel CPU PCB/Touch Panel ---------------------------------------5-16
Pickup Feed System ------------------------------------------------------- 5-17
Setting method when the size detection patterns are overlapped ----5-17
Cassette Left Edge Margin Adjustment (1st side; Mechanical
Adjsutment) -------------------------------------------------------------------------5-18
Cassette Left Edge Margin Adjustment (1st side; Software Adjsutment) -
5-20
Cassette Left Edge Margin Adjustment (2nd side; Software Adjsutment)