Printing On Thick Or Thin Paper; Feed Roller Pressure Lever Position - Gestetner CP6143L Operating Instructions Manual

C2678608_Platinum-EN.book Page 33 Sunday, February 12, 2006 10:53 PM

Printing on Thick or Thin Paper

When you make prints on thick (127.9
2
to 209.3 g/m , 34.0 to 55.6 lb), stan-
dard (52.3 to 127.9 g/m
lb) or thin (47.1 to 52.3 g/m
13.9 lb) paper, perform the following
steps.
Feed Roller Pressure Lever
Position
A
Shift the feed roller pressure le-
ver to the Thick, Standard, or
Thin paper position.
Note
❒ Shift the lever according to the
paper weights as shown in the
following table.
Metric ver-
sion
Thick 127.9–209.3
g/m
Stan- 52.3–127.9
dard
g/m
Thin 47.1–52.3
*1
g/m
*1
When paper is smaller than B5,
" × 8
1
5 /
2
81.4 g/m
feed roller pressure lever to the
Thin paper position.
2
, 13.9 to 34.0
2
, 12.5 to
ANT075S
Inch version
34.0–55.6 lb.
2
13.9–34.0 lb.
2
12.5–13.9 lb.
2
1
/ " and heavier than
2
2
(21.6 lb.), move the
Printing on Thick or Thin Paper
B
Shift the paper feed side plates
lock lever forward. Adjust the
side plates to match the paper
size.
1: Paper Feed Side Plates Lock Le-
ver
C
Make sure that the paper feed
side plates touch the paper light-
ly.
2
1
ANT072S
ZCTH150E
33