Pcu And Quenching Lamp; Pcu - Gestetner B130 Service Manual

PCU AND QUENCHING LAMP

3.6 PCU AND QUENCHING LAMP
When handling the photo conductor unit (PCU), use caution:
• Do not touch the OPC drum with your bare hands. When OPC drum is dirty,
clean it with a dry cloth, or clean it with wet cotton and wipe it with a dry cloth.
• Do not use alcohol or any other chemicals to clean the OPC drum. These
substances damage the OPC-drum surface.
• Keep PCUs in a cool, dry place.
• Do not expose the OPC to any corrosive gas, such as ammonia.
• Do not shake a used PCU. Remaining toner and developer may spill out.
• Dispose of used PCUs in accordance with local regulations.

3.6.1 PCU

1. Open the right door.
NOTE: The PCU may become
stuck if you try to remove
it while the front door is
closed.
2. Open the front door.
3. Remove the toner bottle holder.
NOTE: Clean all spilled toner off
the toner bottle area and
the inside of the front door.
4. Pull out the PCU [A] (
5. After installing the new PCU,
remove the styrofoam and tags (
1.2.2).
Initialization
After you turn on the main power switch, the copier automatically initializes the new
PCU. While the copier is executing initialization, use caution:
• Do not turn off the main power switch.
• Do not open or remove exterior covers.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
x 1).
3-20
CÓPIA NÃO CONTROLADA
[A]
B130R952.WMF
SM