Vlan Acceptframe; Vlan Ingressfilter - NETGEAR ProSafe M7100-24X User Manual

vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode,
untagged frames or priority frames received on this interface are discarded. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged
frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Default
all
Format
vlan acceptframe {untaggedonly | vlanonly | all}
Mode
Interface Config
no vlan acceptframe
This command resets the frame acceptance mode for the interface to the default value.
Format
no vlan acceptframe
Mode
Interface Config

vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted
and forwarded to ports that are members of that VLAN.
Default
disabled
Format
vlan ingressfilter
Mode
Interface Config
no vlan ingressfilter
This command disables ingress filtering. If ingress filtering is disabled, frames received with
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted
and forwarded to ports that are members of that VLAN.
Format
no vlan ingressfilter
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
48