Tacacs-Server Keystring; Tacacs-Server Source Interface - NETGEAR ProSafe M7100-24X User Manual

only. If you want to enter the key in encrypted format, enter the key along with the encrypted
keyword. In the show running config command's display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
Format
tacacs-server key [<key-string> | encrypted <key-string>]
Mode
Global Config
no tacacs-server key
Use the no tacacs-server key command to disable the authentication and encryption
key for all TACACS+ communications between the switch and the TACACS+ daemon. The
<key-string> parameter has a range of 0 - 128 characters This key must match the key
used on the TACACS+ daemon.
Format
no tacacs-server key <key-string>
Mode
Global Config

tacacs-server keystring

Use this command to set the global authentication encryption key used for all TACACS+
communications between the TACACS+ server and the client.
Format
tacacs-server keystring
Mode
Global Config

tacacs-server source interface

Use this command in Global Configuration mode to configure the global source interface
(Source IP selection) for all TACACS+ communications between the TACACS+ client and the
server.
Format
tacacs-server source-interface {<unit/slot/port> | loopback
<loopback-id> | VLAN <vlan-id>}
Mode
Global Config
Parameter Description
unit/slot/port The unit identifier assigned to the switch.
loopback-id The loopback interface. The range of the loopback ID is 0 to 7.
vlan-id The vlan id. The rang of the vlan ID is 1 to 4093.
ProSafe Managed Switch
Management Commands
686