Show Vlan - NETGEAR ProSafe M7100-24X User Manual

private-vlan
This command is used to configure the private VLANs and to configure the association
between the primary private VLAN and secondary VLANs.
Format
private-vlan {association [add | remove] secondary-vlan-list |
community | isolated | primary}
Mode
VLAN Config
Term Definition
association
Associates the primary and secondary VLAN.
secondary-vlan-list
A list of secondary VLANs to be mapped to a primary VLAN.
community
Designates a VLAN as a community VLAN.
isolated
Designates a VLAN as the isolated VLAN.
primary
Designates a VLAN as the primary VLAN.
no private-vlan
This command is used to restore normal VLAN configuration.
Format
no private-vlan {association}
Mode
VLAN Config
vlan
Use this command to enter the private vlan configuration. The VLAN range is 1-4094.
Format
vlan <vlan-list>
Mode
Global Config

show vlan

This command displays information about the configured private VLANs including primary
and secondary VLAN IDs, type (community, isolated, or primary) and the ports that belong to
a private VLAN.
Format
show vlan private-vlan [type]
Mode
• Priviliged EXEC
• User EXEC
ProSafe Managed Switch
Switching Commands
69