Show Ip Access-Lists - NETGEAR ProSafe M7100-24X User Manual

Default
none
Format
ip access-group {<accesslistnumber>|<name>}
{{control-plane|in|out}|vlan <vlan-id> {in|out}}[sequence
<1-4294967295>]
Modes
• Interface Config
• Global Config
no ip access-group
This command removes a specified IP ACL from an interface.
Default
none
Format
no ip access-group <accesslistnumber> {{control-plane|in|out}|vlan
<vlan-id> {in|out}}
Mode
• Interface Config
• Global Config
acl-trapflags
This command enables the ACL trap mode.
Default
disabled
Format
acl-trapflags
Mode
Global Config
no acl-trapflags
This command disables the ACL trap mode.
Format
no acl-trapflags
Mode
Global Config

show ip access-lists

This command displays an IP ACL <accesslistnumber> is the number used to identify
the IP ACL.
Format
show ip access-lists <accesslistnumber>
Mode
Privileged EXEC
Note: Only the access list fields that you configure are displayed.
ProSafe Managed Switch
Quality of Service (QoS) Commands
478