Aaa Authentication Enable - NETGEAR ProSafe M7100-24X User Manual

list-name Character string used to name the list of authentication methods activated when a
user logs in. Up to 12 characters.
method1 [method2...] At least one from the following table:
Keyword
enable
line
local
none
radius
tacacs
The local user database is checked. This has the same effect
Note:
as the following command:
no aaa authentication login
Use this command to remove authentication at login.
Format
no aaa authentication login {default | list-name}
Mode
Global Config

aaa authentication enable

Use this command to set authentication when the user access higher privilege level, use the
aaa authentication enable default
and optional list names that you create with the
used with the
enable authentication
Create a list by entering the
where
list-name
identifies the list of methods that the authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous method returns an
error, not if it fails. To ensure that the authentication succeeds even if all methods return an
error, specify
none
as an authentication method after
down. All
aaa authentication enable default
or TACACS server include the username "
Format
aaa authentication enable {default | list-name} method1 [method2...]
Mode
Global Config
ProSafe Managed Switch
Description
Uses the enable password for authentication.
Uses the line password for authentication.
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS servers for authentication.
aaa authentication enable list-name method
is any character string used to name this list. The
as the final method in the command line. For example, if
radius
Management Commands
aaa authentication login local
command in global configuration mode. The default
aaa authentication enable
command.
, no authentication is used if the radius server is
requests sent by the switch to a RADIUS
.", where is the requested privilege level.
$enabx$ x
650
command are
command
argument
method
is specified
none