NETGEAR ProSafe M7100-24X User Manual page 734

no session-timeout
Use this command to reset the session timeout to the default.
Format
session-timeout <0-86400>
Mode
Captive Portal Instance mode
idle-timeout
Use this command to configure the idle timeout for a captive portal configuration. 0 indicates
timeout not enforced. After an idle session has been reached this, the user will be
disconnected.
Default
0
Format
idle-timeout <0-900>
Mode
Captive Portal Instance mode
no idle-timeout
Use this command to reset the idle timeout to the default.
Format
no idle-timeout
Mode
Captive Portal Instance mode
locale
This command is not intended to be a user command. The administrator must use the WEB
UI to create and customize captive portal web content. This command is primarily used by
the show running-config command and process as it provides the ability to save and restore
configurations using a text based format.
Default
1
Format
locale
Mode
Captive Portal Instance mode
no locale
This command is intended to delete a locale. The default locale cannot be deleted.
Format
no locale
Mode
Captive Portal Instance mode
ProSafe Managed Switch
<1-5>
<1-5>
Captive Portal Commands
734