Area Nssa No-Summary (Ospfv); Area Nssa Translator-Role (Ospfv); Area Nssa Translator-Stab-Intv (Ospfv) - NETGEAR ProSafe M7100-24X User Manual

area nssa no-summary (OSPFv3)
This command configures the NSSA so that summary LSAs are not advertised into the
NSSA.
Format
area <areaid> nssa no-summary
Mode
Router OSPFv3 Config
no area nssa no-summary (OSPFv3)
This command disables nssa from the summary LSAs.
Format
no area <areaid> nssa no-summary
Mode
Router OSPF Config
area nssa translator-role (OSPFv3)
This command configures the translator role of the NSSA. A value of always causes the
router to assume the role of the translator the instant it becomes a border router and a value
of candidate causes the router to participate in the translator election process when it
attains border router status.
Format
area <areaid> nssa translator-role {always | candidate}
Mode
Router OSPFv3 Config
no area nssa translator-role (OSPFv3)
This command disables the nssa translator role from the specified area id.
Format
no area <areaid> nssa translator-role {always | candidate}
Mode
Router OSPF Config
area nssa translator-stab-intv (OSPFv3)
This command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to perform
its duties after it determines that its translator status has been deposed by another router.
Format
area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
Router OSPFv3 Config
ProSafe Managed Switch
IPv6 Commands
382