Isdp Enable; Clear Isdp Counters; Clear Isdp Table; Show Isdp - NETGEAR ProSafe M7100-24X User Manual

isdp enable

This command enables ISDP on the interface.
Default
Enabled
Format
isdp enable
Mode
Interface Config
no isdp enable
This command disables ISDP on the interface.
Format
no isdp enable
Mode
Interface Config

clear isdp counters

This command clears ISDP counters.
Format
clear isdp counters
Mode
Privileged EXEC

clear isdp table

This command clears entries in the ISDP table.
Format
clear isdp table
Mode
Privileged EXEC

show isdp

This command displays global ISDP settings.
Format
show isdp
Mode
Privileged EXEC
Term Definition
Timer
The frequency with which this device sends ISDP packets. This value is given in
seconds.
Hold Time
The length of time the receiving device should save information sent by this device. This
value is given in seconds.
Version 2
The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted.
Advertisements
ProSafe Managed Switch
Switching Commands
203