Show Igmpsnooping Mrouter Interface; Show Igmpsnooping Mrouter Vlan - NETGEAR ProSafe M7100-24X User Manual

When you specify a value for <vlan_id>, the following information appears:
Term Definition
VLAN ID
The VLAN ID.
IGMP Snooping
Indicates whether IGMP Snooping is active on the VLAN.
Admin Mode
Fast Leave
Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Mode
Group
The amount of time in seconds that a switch will wait for a report from a particular group
Membership
on a particular interface, which is participating in the VLAN, before deleting the interface
Interval
from the entry.This value may be configured.
Maximum
The amount of time the switch waits after it sends a query on an interface, participating in
Response Time
the VLAN, because it did not receive a report for a particular group on that interface. This
value may be configured.
Multicast
The amount of time to wait before removing an interface that is participating in the VLAN
Router Expiry
from the list of interfaces with multicast routers attached. The interface is removed if a
Time
query is not received. This value may be configured.

show igmpsnooping mrouter interface

This command displays information about statically configured ports.
Format
show igmpsnooping mrouter interface <unit/slot/port>
Mode
Privileged EXEC
Term Definition
Interface
The port on which multicast router information is being displayed.
Multicast
Indicates whether multicast router is statically enabled on the interface.
Router
Attached
VLAN ID
The list of VLANs of which the interface is a member.

show igmpsnooping mrouter vlan

This command displays information about statically configured ports.
Format
show igmpsnooping mrouter vlan <unit/slot/port>
Mode
Privileged EXEC
Term Definition
Interface
The port on which multicast router information is being displayed.
VLAN ID
The list of VLANs of which the interface is a member.
ProSafe Managed Switch
Switching Commands
153