Show Ip Ospf Database Database-Summary - NETGEAR ProSafe M7100-24X User Manual

Parameter Description
adv-router
Use adv-router to show the LSAs that are restricted by the advertising router.
self-originate
Use self-originate to display the LSAs in that are self originated. The information
below is only displayed if OSPF is enabled
The information below is only displayed if OSPF is enabled.
Format
show ip ospf [<areaid>] database [{database-summary | [{asbr-summary
| external | network | nssa-external | opaque-area | opaque-as |
opaque-link | router | summary}] [{adv-router [<ipaddr>] |
self-originate}]}]
Mode
• Privileged EXEC
• User EXEC
For each link-type and area, the following information is displayed:
Term Definition
Adv Router
The Advertising Router. Is a 32 bit dotted decimal number representing the LSDB
interface.
Age
A number representing the age of the link state advertisement in seconds.
Sequence
A number that represents which LSA is more recent.
Checksum
The total number LSA checksum.
Options
This is an integer. It indicates that the LSA receives special handling during routing
calculations.
Rtr Opt
Router Options are valid for router links only.

show ip ospf database database-summary

Use this command to display the number of each type of LSA in the database for each area
and for the router. The command also displays the total number of LSAs in the database.
Format
show ip ospf database database-summary
Modes
• Privileged EXEC
• User EXEC
Term Definition
Router
Total number of router LSAs in the OSPF link state database.
Network
Total number of network LSAs in the OSPF link state database.
Summary Net
Total number of summary network LSAs in the database.
Summary ASBR Number of summary ASBR LSAs in the database.
ProSafe Managed Switch
Routing Commands
290