Ipv6 Nd Ra-Interval; Ipv6 Nd Ra-Lifetime - NETGEAR ProSafe M7100-24X User Manual

no ipv6 nd other-config-flag
This command resets the "other stateful configuration" flag back to its default value in router
advertisements sent from the interface.
Format
no ipv6 nd other-config-flag
Mode
Interface Config

ipv6 nd ra-interval

This command sets the transmission interval between router advertisements.
Default
600
Format
ipv6 nd ra-interval-max <4- 1800>
Mode
Interface Config
no ipv6 nd ra-interval
This command sets router advertisement interval to the default.
Format
no ipv6 nd ra-interval-max
Mode
Interface Config

ipv6 nd ra-lifetime

This command sets the value, in seconds, that is placed in the Router Lifetime field of the
router advertisements sent from the interface. The <lifetime> value must be zero, or it
must be an integer between the value of the router advertisement transmission interval and
9000. A value of zero means this router is not to be used as the default router.
Default
1800
Format
ipv6 nd ra-lifetime <lifetime>
Mode
Interface Config
no ipv6 nd ra-lifetime
This command resets router lifetime to the default value.
Format
no ipv6 nd ra-lifetime
Mode
Interface Config
ProSafe Managed Switch
IPv6 Commands
360