•
show port all
•
show isdp neighbors
•
show logging
•
show event log
•
show logging buffered
•
show trap log
Format
show tech-support
Mode
Privileged EXEC
show tech-support techsupport
This command without the techsupport parameter displays system and configuration
information on the console. To generate the information in a file, specify the techsupport
parameter.
Format
show tech-support techsupport
Mode
Privileged EXEC
length
Use this command to set the pagination length to value number of lines for the sessions
specified by configuring on different Line Config modes (telnet, ssh, and console) and is
persistent.
Default
24
Format
length <0|5-48>
Mode
Line Config
no length value
Use this command to set the pagination length to the default value number of lines.
Format
no length
Mode
Line Config
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e.
pagination, for the show running-config and show running-config all commands.
The terminal length size is either zero or a number in the range of 5 to 48. After the
user-configured number of lines is displayed in one page, the system prompts the user
"--More-- or (q)uit." Press q or Q to quit, or press any key to display the next set
ProSafe Managed Switch
Utility Commands
527