Show Mldsnooping Mrouter Interface - NETGEAR ProSafe M7100-24X User Manual

Term Definition
MLD Control
Displays the number of MLD Control frames that are processed by the CPU.
Frame Count
VLANs Enabled
VLANs on which MLD Snooping is enabled.
for MLD
Snooping
When you specify the
Term Definition
MLD Snooping
Indicates whether MLD Snooping is active on the interface.
Admin Mode
Fast Leave
Indicates whether MLD Snooping Fast Leave is active on the VLAN.
Mode
Group
Shows the amount of time in seconds that a switch will wait for a report from a particular
Membership
group on a particular interface, which is participating in the VLAN, before deleting the
Interval
interface from the entry. This value may be configured.
Max Response
Displays the amount of time the switch waits after it sends a query on an interface,
Time
participating in the VLAN, because it did not receive a report for a particular group on that
interface. This value may be configured.
Multicast
Displays the amount of time to wait before removing an interface that is participating in
Router Present
the VLAN from the list of interfaces with multicast routers attached. The interface is
Expiration Time
removed if a query is not received. This value may be configured.
When you specify a value for
Term Definition
VLAN Admin
Indicates whether MLD Snooping is active on the VLAN.
Mode

show mldsnooping mrouter interface

Use this command to display information about statically configured multicast router attached
interfaces.
Format
show mldsnooping mrouter interface unit/slot/port
Mode
Privileged EXEC
Term Definition
Interface
Shows the interface on which multicast router information is being displayed.
Multicast
Indicates whether multicast router is statically enabled on the interface.
Router
Attached
VLAN ID
Displays the list of VLANs of which the interface is a member.
ProSafe Managed Switch
values, the following information displays.
unit/slot/port
, the following information appears.
vlanid
Switching Commands
163