Show Captive-Portal User - NETGEAR ProSafe M7100-24X User Manual

has been reached the user will be disconnected. <1-128> is the user ID. The range of octets
is 0-4294967295. 0 indicates to use the global limit. Use the "no" form of this command to
reset the limit to the default.
Default
0
Format
user <1-128> max-total-octets octets
Mode
Captive Portal Configuration mode
no user max-total-octets
Use this command to reset the limit to the default.
Format
no user <1-128> max-total-octets
Mode
Captive Portal Configuration mode

show captive-portal user

Use this command to display all configured users or a specific user in the captive portal local
user database.
Format
show captive-portal user [ <1-128> ]
Mode
Privileged EXEC mode
Term Definition
User ID
The user ID
User Name
The user name
Session Timeout
Logout once session timeout is reached (seconds). If the value is 0 then use the value
configured for the captive portal.
Idle Timeout
Logout once idle timeout is reached (seconds). If the attribute is 0 then use the value
configured for the captive portal.
Group ID
The group ID associated with the user
Group Name
The group name
If the user ID is specified, the following terms are displayed.
Term Definition
Password
If the password is configured.
Configured
Max Bandwidth
Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send
Up (bytes/sec)
data into the network. If the value is 0 then use the value configured for the captive
portal.
ProSafe Managed Switch
Captive Portal Commands
748