System Utility And Clear Commands - NETGEAR ProSafe M7100-24X User Manual

Term Definition
No of mail
The number of SMTP servers configured on the switch.
servers
configured
Email Alert Mail
The IPv4/IPv6 address or DNS hostname of the configured SMTP server.
Server Address
Email Alert Mail
The TCP port the switch uses to send email to the SMTP server.
Server Port
Email Alert
The security protocol (TLS or none) the switch uses to authenticate with the SMTP
Security
server.
Protocol
Email Alert
The username the switch uses to authenticate with the SMTP server.
Username
Email Alert
The password the switch uses to authenticate with the SMTP server.
Password

System Utility and Clear Commands

This section describes the commands you use to help troubleshoot connectivity issues and to
restore various configurations to their factory defaults.
traceroute
Use the traceroute command to discover the routes that packets actually take when
traveling to their destination through the network on a hop-by-hop basis. Traceroute
continues to provide a synchronous response when initiated from the CLI.
Default
• count: 3 probes
• interval: 3 seconds
• size: 0 bytes
• port: 33434
• maxTtl: 30 hops
• maxFail: 5 probes
• initTtl: 1 hop
Format
traceroute <ipaddr|hostname> [initTtl <initTtl>] [maxTtl <maxTtl>]
[maxFail <maxFail>] [interval <interval>] [count <count>]
[port <port>] [size <size>] [source{ip-address|<unit/slot/port> |
loopback <0-7>}]
Mode
Privileged EXEC
ProSafe Managed Switch
Utility Commands
540